PrimordialPC

Fix my PC

Fans spin but the screen stays black

Work through these checks in order. The first ones are the most common causes.

  1. Wait 3 minutes. New DDR5 PCs train their memory on the first boot and show nothing until they finish.
  2. Plug the monitor into the graphics card, not the motherboard. This is the most common mistake on new PCs.
  3. Look for a lit debug LED on the motherboard near the RAM: CPU, DRAM, VGA or BOOT tells you which part to check.
  4. Reseat the RAM: one stick in slot A2 only, pressed until both clips click. Then reseat the graphics card and its power cable.
  5. Clear the CMOS (a button or two pins, see the manual) to reset BIOS settings such as EXPO or XMP.

Helpful, official sources

Open the free interactive tool